NICE1000 Series Technical parameters Integrated Controller for Elevator Models

NICE1000 Series Integrated Controller for Elevator Models

 

System Models	Input Voltage	Power Capacity （KVA）	Input Current (A)	Output Current (A)	Appropriate Motor (kW)
NICE-L-G/V-2002	Three Phase 220V Range: -15%~20%	4.0	13.2	9.6	2.2
NICE-L-G/V-2003		5.9	17.0	15.6	3.7
NICE-L-G/V-4002	Three Phase 380V Range: -15%~20%	4.0	6.5	5.1	2.2
NICE-L-G/V-4003		5.9	10.5	9.0	3.7
NICE-L-G/V-4005		8.9	14.8	13.0	5.5
NICE-L-G/V-4007		11.0	20.5	18.0	7.5
NICE-L-G/V-4011		17.0	29.0	27.0	11
NICE-L-G/V-4015		21.0	36.0	33.0	15
NICE-L-G/V-4018		24.0	41.0	39.0	18.5
NICE-L-G/V-4022		30.0	49.5	48.0	22
NICE-L-G/V-4030		40.0	62.0	60.0	30

 

The input voltage in the table above is for 220V products for three phase input application environments. If the input voltage is single phase, the power level should be increased one level. For instance, a NICE-L-G-2003 can be used for single phase 220V input driving a 2.2KW motor.

Technical Specifications

 

Category		Description/Specifications
Basic Specifications	Maximum Frequency	90Hz
	Carrier Frequency	0.5kHz~16kHz; carrier frequency can be automatically adjusted according to load.
	Motor Control Method	Open Loop Vector Control/Closed Loop Vector Control
	Startup Torque	0.5Hz/180％（Open Loop Vector Control）； 0Hz/200％（Closed Loop Vector Control） 0.5Hz/180% (SVC); 0Hz/200% (VC)
	SpeedRange	1：100 （Open Loop Vector Control）(SVC)	1：1000 （Closed Loop Vector Control）(VC)
	Speed Stabilizing Precision	±0.5％（Open Loop Vector Control） (SVC)	±0.05％（Closed Loop Vector Control） (VC)
	Torque Control Precision	±5％（Closed Loop Vector Control）(VC)
	Overload Capability	150% of rated current for 60s;200% of rated current for 1s
	Motor Tuning	Asynchronous motors require static motor tuning; synchronous motors require initial angle tuning
	Distance Control	Flexible adjustment of the direct stopping method of the leveling position.
	Speed Up/Down Curve	N curve created automatically
	Releveling	After there is a change in the carriage load, the flat bed will readjust.
	Forced Speed Down	A new, dependable forced speed down capability automatically distinguishes the position of deceleration rack.
	Shaft Automatic Learning	Uses 32-bit data, accurately recording the shaft position.
	Leveling Adjustment	Capable of flexible, easy adjustment of flat bed.
	Startup Torque Compensation	Personalized auto-learning weighing function.
	Testing Capability	Easy method for application of multiple elevator debugging functions.
	Malfunction Prevention	53 protection functions including short circuit check during motor electrification, I/O lack-phase protection, overcurrent protection, door malfunctions, coding protection.
	Power-On Safety Self Test of Peripheral Devices	Performs safety checks on peripheral machines for grounding, short circuits, etc.
	Status Monitoring	Assuring the regular operation of elevators based on the evaluation of response signals.
I/O Specifications	ON/OFF Input	24 ON/OFF input terminals, input specifications are 24V, 5mA
	Analog Input	An expansion board provides analog input; input voltage range 0~10V
	CommunicationsPort	An expansion board provides MODBUS communications
	OutputPort	24 relay output terminal with functions that can be set
	FloorI/O Port	26 Floor Button I/O terminal that can be set
	Coded Disk Interface	Standard incremental coding device for open circuit collector output and SH-pull output. Additional MCTC-PG-D divider card to be used with UVW coders. Additional MCTC-PG-E divider card to be used with sine/cosine incremental coding devices.
Operation and Notices	Control Panel	5 LED display, showing performance parameters, operational speed, collecting main voltage, etc.
	Small Keyboard	Shaft Auto-learning
	Status Monitoring	Monitors all elevator parameters
Environment	Elevation	Lower than 1000m
	Temperature	-10oC~+40oC (in temperatures of 40oC-50oC, please derate to use)
	Humidity	Less than 95%RH; no condensation
	Shock	Less than 5.9m/s2 (0.6g)
	Storage Temperature	－20℃～＋60℃

Inovance-Leading Frequency Inverter,Frequency Converter Drive China  Manufacturer

Specialized Drive for Elevator NICE1000 Overview

Input Voltage: Three Phase 220V, Three Phase 380V
Power Capacity (kVA): 4.0~40
Input Current (A): 13.2~62
Output Current (A): 9.6~60
Appropriate Motor (kW): 2.2~30

The NICE1000 is an independently developed integrated controller specifically for elevators designed by MCTC. Focusing on electronic systems in elevators, MCTC uses an entirely parallel signal transmission method, combining the advantages of high stability, ease of use and no need for adjustment that allow this perfect integration to be used in both private and cargo elevators.

Naming Rules

The structural code G is for NICE1000 integrated elevators with asynchronous motors. The structural code V is for NICE1000 integrated elevators with synchronous motors.

 Inovance-Leading Frequency Inverter,Frequency Converter Drive China  Manufacturer