NICE900 Door Motor Technical parameters

Model: NICE900 Door Motor

Technical parameters

System Model	Input Voltage	Power capacity (kVA)	Input Current (A)	Output Current (A)	Appropriate Motor (W)
NICE-D-A-S0P2	Single Phase 220V -15%～20%	0.5	2.7	1.3	200
NICE-D-A-S0P4		1.0	5.4	2.3	400
NICE-D-A-S0P7		1.5	8.2	4.0	750

 

Technical Specifications

 

Category	Details	Technical Specifications
Capability Controls	Maximum Output Frequency	99.00Hz
	SpeedRange	1:50 (magnetic flux vector control), 1:1000 (vector control)
	Speed Stabilizing Precision	±0.5% (magnetic flux vector control), ±0.05% (Closed Loop vector control
	Startup Torque	0Hz-180% (Closed Loop vector control)   1Hz-150% (magnetic flux vector control)
	Frequency Resolution	0.01Hz
	Current resolution	0.001A
	Carrier Frequency	2kHz～16kHz
Main Capabilities	Supports static and dynamic tuning motor parameters for AC asynchronous motors. Supports idle load and loaded motor tuning parameters and coding zero point positions for AC magnetic synchronous motors.
	Supports AC magnetic synchronous vector control ABZ encoding , encoder open circuit collector ouput or push-pull output.
	Supports automatic torque increases, manual torque increases, overexcitation and other capabilities for magnetic flux vector control.
	Supports direct stopping in distance control (under development)
	Supports door-width auto-learning
	Supports automatic demos
	Supports automatic malfunction identification.
Protection Capabilities	Controller overload protection: 150% of rated current for 1m, 180% of rated current for 1s
	Supports controller overvoltage protection, undervoltage protection, overcurrent protection, ouput lack phase protection and phase-phase short circuit protection.
Environment	Installation Conditions	Indoor use only, keep out of direct sunlight, avoid contact with dust, corrosive gases, flammable gases, smoke, vapor, condensation and salts.
	Elevation	Lower than 1000m; if higher than 1000m, please derate to use
	Temperature	-10oC~+40oC (in temperatures of 40oC-50oC, please derate to use)
	Humidity	Less than 95%RH; no condensation
	Shock	Less than 5.9m/s2 (0.6g)
	Storage Temperature	－20℃～＋60℃
	Cooling Method	0.2kW: self cooled; 0.4kW and 0.75kW: wind cooled
	Protection Level	IP20
	Storage Location	Store in a clean, dry indoor place.
	Shipping Method	Ship in standard container via motor vehicle, train, plane or ship.
	Shipping Vibration	Sine vibration 9~200Hz/hr, 15m/s2 (1.5g)

 

External and Installation Hole Site Dimensions

 Inovance-Leading Frequency Inverter,Frequency Converter Drive China  Manufacturer